Product Introduction:
PPM-T232A flat film pressure transducer is made of special and rugged stainless steel flush and thick film with high performance intelligent operation compensation circuit. The all-stainless steel integrated structure ensures that the hard particle impact in the measured medium will not damage the sensor diaphragm. With anti-blocking, anti-particle impact, anti-vibration and other characteristics, it is suitable for high-temperature viscous and easy to block slurry, field, strong vibration, solid-liquid mixed fluid pressure measurement.
Applications :
PPM-T232A flat film pressure sensor can be widely used in mud, coal slurry, pulp, crude oil, asphalt, etc., oil well measuring instruments.
Environmental protection chemical coatings, polyurethane equipment, paint detection systems, etc.Food slurry and other solid-liquid mixtures.
Technical Parameters :
Measured medium : | Non-corrosive gas and liquid to 17-4PH, 316L stainless steel |
Pressure Type : | Sealed Reference Pressure, Gauge Pressure |
Measuring range: | 0 ~ 6MPa… 10MPa… 150MPa |
Power supply : | 24VDC (12-32VDC) |
Output signal : | 4-20mA, 1-5VDC, 0-5VDC, 0-10VDC selectable |
Mounting thread : | M20 × 1.5, G1 / 2, 1 / 2NPT |
Electrical interface : | Hirschmann connector, aerial plug, direct outlet |
Non-linear : | 0.2% FS |
Repeatability : | 0.1% FS |
Accuracy: | 0.2% FS, 0.5% FS optional |
Long-term stability : | 0.2% FS / year (typical value) |
Working environment temperature : | -20 ~ + 75 ℃ |
Working medium temperature : | -40 ~ + 85 ℃ |
Definition of wiring:
Dimensions in mm :
No. 188, Huanbao Road, Yuhua Zone, Changsha, Hunan, China
+86-731-82561520
info@csppm.com
Subscribe to our newsletter for discounts and more.