info@csppm.com CSPPM-18+ years of focus on R&D and manufacturing of pressure、level and weight sensor
Liquid Level Sensor

Liquid Level Sensor

Home > Liquid Level Sensor

PPM-127E Submersible Liquid Level Transmitter

PPM-127E Submersible Liquid Level Transmitter

  • Measuring range: 0 ~200m
  • Power supply range: 12 ~ 36VDC
  • Resolution : 0.01% FS
  • Working environment temperature: -30℃ ~ + 70 ℃

Product Introduction:

The PPM-127E submersible liquid level transmitter uses digital technology to collect real-time liquid level and temperature signals on the spot. After the CPU performs calculation compensation and parameter correction, it is converted by the D / A circuit into a high-precision two-wire system 4 ~ 20mA analog .The signal and RS485 digital interface signal ensure the high precision and high reliability of the product. The level transmitter’s zero point, full scale, unit, address and other parameters are open to users, so that when users need to adjust the product, or need to monitor multiple products at the same time, through RS485 interface and dedicated data cables and software , perform on-site pressureless calibration and adjustment. This series offers customized services.

Applications :

PPM-127E submersible liquid level sensor can be widely used in water storage, drainage, sewage treatment systems, urban groundwater, lakes, reservoirs, dams, open oil tanks, circulating water, water towers, coolants, etc.

Technical Parameters :

Measuring range: 0 ~ 0.5m, 1m, 2m, 3m, 5m, 10m, 15m … 200m
Overload capacity : 300%
Power supply range: 12 ~ 36VDC
Signal output: 4 ~ 20mA(two wire), digital signal: RS485(four wire)
Accuracy : 0.075% FS, 0.1% FS, 0.2% FS, 0.5% FS (including non-linear, repetitive, hysteresis)
Resolution : 0.01% FS
Working medium temperature: -30 ~ + 80 ℃ High-temperature type customization (-20 ~ + 150 ℃ / 250 ℃)
Working environment temperature: -30 ~ + 70 ℃
Protection class : IP68
Interface and housing : Stainless steel 1Cr18Ni9Ti
Sensor diaphragm: 316L stainless steel, 96% alumina ceramic
Seals: All-in-one stainless steel construction, no plastic seals
Cable: Φ7.5mm polyethylene (or polyurethane) air conducting cable
Installation method: input

 Definition of wiring:

PPM-127E Submersible Liquid Level Sensor

Dimensions in mm :

PPM-127E Submersible Liquid Level Transducer

Quick Contact

Our Newsletter

Subscribe to our newsletter for discounts and more.

China High Quality Industrial Automation Sensor Manufacturer. Copyright © 2021-2024 Changsha Taihe Electronic Equipment Co., Ltd. . All Rights Reserved.