Product Introduction:
PPM228-1 cantilever beam load cell sensors are fixed at one end and loaded at one end. They have various stress forms, low center of gravity, easy installation and good interchangeability. PPM228-1 load cell sensors are suitable for truck scales, electronic scales, hopper scales, etc. Optional built-in amplifier 4-20mA output. It can be used for various ultra-thin electronic truck scales, monorail crane scales, hopper scales, belt scales, mixing stations, etc .; it can also be used for analysis and measurement of strength in various industrial systems, and can also be displayed with control instruments and dynamic and static strain. The instrument is used for pressure, weighing and force measurement.
Performance:
Rated load | 0-30kg-20t (Any choice between) |
Comprehensive accuracy | 0.02%,0.03%(Linear + hysteresis + repeatability) |
Sensitivity | 2.0mV/V |
External transmitter output | 4-20mA,0-5VDC,0-10VDC(options) |
Creep | ±0.02%FS/30 min |
Zero output | ±1%FS |
Zero temperature effect | ±0.02%FS/10℃ |
Influence of output temperature | ±0.02%FS/10℃ |
Operating temperature | -20℃-+65℃ |
input resistance | 380±10Ω |
Output impedance | 350±3Ω |
Insulation resistance | >5000MΩ |
Safe overload | 150%FS |
Donor voltage | 3-15VDC Suggest
10VDC |
Transmitter voltage | 11.5-32VDC Suggest
24VDC |
Material | Alloy steel or stainless steel |
Internal filling | Silicone grease |
Definition of wiring:
Wiring | Sensor | Input (+): red line Input (-): black line |
Output (+); Green line Output (-): White line | ||
Transmitter | Power supply: Red Public ground: Green Output: Yellow | |
Display control instrument | Optional PPM-TC1CT (E) (0.05% accuracy) display control instrument
Optional PPM-TC1CB5 (0.2%, 0.05% accuracy) Display control instrument PPM series / static strain gauge |
Dimensions in mm :
No. 188, Huanbao Road, Yuhua Zone, Changsha, Hunan, China
+86-731-82561520
info@csppm.com
Subscribe to our newsletter for discounts and more.